Top 13 Best Chainsaw For Carving And Complete Buying Guide

Wood carving is a common job in the furniture industry. This is also considered a special art form and is surprising because most of the products are quite sophisticated. However, to create the best wood carvings, a suitable tool is required. Therefore, we would immediately think of The Best Chainsaw for Carving. We could also use a normal Chainsaw but its effect would be difficult to guarantee. These arving chainsaw need to be light, easy to hold, and capable of minimizing vibrations needed to take the most intricate engravings. For that, the engines need to be strong and running smoothly.

Besides, with the above requirements, finding The Best Chainsaw for Carving might not be easy. For that reason, we - Agern Restaurant decided to synthesize, analyze and compare some outstanding products. Below, we would list the Top 13 The Best Chainsaw for Carving with the Buying Guide for readers to refer to. Follow our articles to find the perfect product for you.

Best 5 Chainsaw for Carving Comparison 2020

** Below, you will find our detailed reviews of the best chainsaw for carving, but you can also click these following links to see current prices or read customer reviews on Amazon.

Bestseller No. 2
FUNTECK 4 in.Grinder Disc 22-Teeth Steel Chainsaw Blade Wood Carving Disc for Cutting and Shaping, 5/8” Arbor, Fits 4” or 4-1/2” Angle Grinders, 2 Pack
  • The 22-teeth chain saw cutter fits most 4 in.(100 mm) , 4.5 in.(115 mm) and European 125 mm angle grinders with 5/8 in.(16 mm)center holes.
  • The 4 in.(100 mm) Dia chainsaw blade is housed between 2 stainless steel discs, which provides a secure grip for carving. Regardless of grain or knots, the blade cuts through the material with ease.
Bestseller No. 4
Grinder Wood Carving Chain Disc, Angle Grinder Chain Disc Steel 4'' 22 Teeth 5/8'' Arbor, Chainsaw Grinder Wheel, Fits 4'' or 4"-1/2" Angle Grinder for Fine Cutting Sculpting and Shaping (2 Pack)
  • ⭐4 INCH WOOD CARVING DISC : 5/8" (16mm) arbor, 14000rpm Max, 4" diameter. For use with 4'' or 4-1/2'' angle grinders.
  • ⭐SHARP CIRCULAR SAW BLADES : 22 teeth leaves a smoother "finished" surface for minimal sanding. Chains can be resharpened using a chain saw file or replaced. Easily cuts the hardest woods regardless of grain or knots.
Bestseller No. 5
Yakamoz 4 Inch Angle Grinder Disc Chain Plate 22 Tooth Wood Carving Disc Chainsaw Cutter Woodworking Tool for 100/115 mm Angle Grinder 5/8 Inch Center Hole
  • Arbor size: 5/8" (16mm), Diameter: 4" (102mm), Maximum speed: 14000RPM, Wheel thickness: 5mm
  • The chain saw blade is held in place between two steel plates which provides a secure grip for carving.
Bestseller No. 6
Grinder wood carving chain saw disc,4" chainsaw grinder wheel,  Anti-kickback Double Saw Teeth Shaper, Cutting, Shaping Chain Blade for 100/115 Angle Grinder,22 Teeth, 5/8' Arbor  
  • 🔼 Grinder wood carving chain saw disc,chainsaw grinder wheel ,  Anti-kickback Double Saw Teeth Shaper, Cutting, Shaping Chain Blade for 100/115 Angle Grinder,22 Teeth, 5/8' Arbor  
  • 🔼 Material: Steel 22 tooth design provides a smooth "finished" surface which is great for minimal sanding afterwards.4" Diameter;Maximum running RPM is 14,000 RPM
Bestseller No. 7
2Pcs Angle Grinder Saw Blade Tools, 4 in Grinder Disc 22-Teeth Steel Chainsaw Blade Wood Carving Disc for Cutting and Shaping, 5/8” Arbor, Fits 4” or 4-1/2” Angle Grinders
  • 【Grinder Wood Carving Saw Disc】22 Teeth, 5/8' Arbor, 102mm/4 inch grinder discs, the rotation speed is between 10000-14000rpm, anti-kickback double saw teethshaper, cutting, shaping chain blade fits for 100/115 angle grinder.
  • 【Quality Material】This wood grinding wheel is made of premium Steel, 4 Inch Diameter Chain 22 Tooth Fine Cut Carving, Circular Saw Blades provides a smooth "finished" surface which is great for minimal sanding afterwards.Steel /Chains can be either be sharpened using a chain saw file or replaced as need be.
Bestseller No. 8
BlueCatELE 4.5" Chainsaw Grinder Wheel Grinder Wood Carving Disc Wood Carving Disc 7/8" Arbor 13 Teeth 2 Pack
  • Production Name:4.5" Grinder Chainsaw Wheel, Arbor Diameter: 7/8"(22.23mm), Overview Diameter: 4.5"(115mm),Max Speed(RPM):13000, Wheel Cut Width:0.2in/5mm
  • 4.5" chainsaw around disc and 13 teeth, more durable and fine cutting,carving and grinding

Top Best Chainsaw For Carving Reviews 2020

Husqvarna 18 Inch 455 Rancher Gas Chainsaw
  • 455 Rancher chainsaw is an ideal saw for landowners or homeowners who require a high powered and heavy duty chainsaw
  • 55. 5cc 18 inch gas chainsaw with guide bar and chain

The next product we review is also from Husqvarna - 455 Rancher 18 Inch Gas Chainsaw. This heavy machine would have an excellent powerful motor for handling wood carving. The 2-stroke, 55cc of powerful engine and 3.49 horsepower could help this machine handle most of the toughest woods.

In addition, the machine uses gas fuel to ensure high capacity and stability. However, it would not be too fuel efficient thanks to its outstanding X-toque. The chain tension system is quite flexible as you could make quick and straightforward adjustments even during operation. Moreover, the air filter could be also easily removable to make cleaning easier. Safety brake, guide bar and 18” chain are included.

The machine could be able to boot quite quickly with a simple button switch. Vibration is also limited thanks to the Low-Vib system. However, this machine could be quite expensive, and gas fuel is not considered very environmentally friendly.

PROS

  • High capacity motor
  • The heavy-duty machine handles tough woods
  • Save fuel thanks to outstanding X-toque
  • Easy-to-clean removable filter
  • Automatic lubrication system
  • Powerful performance and engine

CONS

  • High price
  • Difficult to use
  • Not environmentally friendly
  • Necessary parts and accessories are not included

Husqvarna 120 Mark II 16 in. Gas Chainsaw, 16 inch
  • Compact, casual-use chainsaw that’s designed to start up easily
  • Low kickback safety features, including built-in safety break, reduces risk during operation

Husqvarna Mark II 16 inch 120 Gas Chainsaw is a heavy duty saw. The fuel used for the machine is Gas, which could be damaged through outstanding X-toque. The saw runs on gas so its efficiency could be quite high and could handle the toughest woods. Besides, this feature could also be reinforced by the 16-inch saw blade.

This saw has some of the following safety features. First, the machine has a safe self-shutdown system when it could detect a kickback during use. Second, safety brakes are also available. Automatic oiling system to increase stability and save users time. In addition, the tension system is also simply designed so that you can easily adjust and control during operation.

A Low-Vib system is installed to limit the vibration of the machine while it is running. Nevertheless, this type of machine could be quite expensive and the use of gas fuel is not considered very environmentally friendly.

PROS

  • Powerful performance and engine
  • High capacity motor
  • The heavy-duty machine handles tough woods
  • Save fuel thanks to outstanding X-toque
  • Automatic lubrication system

CONS

  • High price
  • Difficult to use
  • Not environmentally friendly
  • Necessary parts and accessories are not included

BLACK+DECKER 20V Max Cordless Chainsaw, 10-Inch, Tool Only (LCS1020B)
  • 10 inches Premium Oregon low kickback bar and chain
  • Tool-Free blade tension system for quick adjustments

Black + Decker Max Cordless 20V Chainsaw could be the first product we would like to mention for the top Best Chainsaw for Carving. This product is a battery-operated saw which could be convenient and environmentally friendly. Since the batteries used are lithium-ion with 20V, the saw has a pretty good performance and could be used up to 5 times on a single charge.

In addition, this is a compact cordless saw (about 7.2 lbs) so handling and carrying it would be relatively easy. The handle is also rubberized, for better handling and control of the machine.

Besides that, the engine provided for the machine runs smoothly and without noise and produces smooth cuts. This would be also reinforced by an advanced and modern lubrication system.

This could be considered a fairly easy machine to use and maintain with a Lubrication system without tools. Furthermore, products are quite affordable in price. However, some of the product's materials are made of plastic so it might not be too durable.

This saw has some of the following safety features. First, the machine has a safe self-shutdown system when it could detect a kickback during use. Second, safety brakes are also available. Automatic oiling system to increase stability and save users time. In addition, the tension system is also simply designed so that you can easily adjust and control during operation.

A Low-Vib system is installed to limit the vibration of the machine while it is running. Nevertheless, this type of machine could be quite expensive and the use of gas fuel is not considered very environmentally friendly.

PROS

  • Affordable price
  • Eco-friendly product
  • Compactable and portable
  • Low chain and kickback
  • Lubrication system is automatic
  • Good anti-vibration
  • Safety for the user and Easy to use

CONS

  • There are a few plastic parts
  • It could take long time to charge the battery
  • Not environmentally friendly

Makita XCU03PT1 18V X2 (36V) LXT Lithium-Ion Brushless Cordless 14" Chain Saw Kit with, 4 Batteries (5.0Ah)
  • Makita-built outer rotor BL Brushless motor direct-drive system provides high power efficiency equivalent to a 32cc gas chain saw
  • Variable speed trigger and high chain speed (0-3, 940 FPM) For improved cutting performance

Makita 18V X2 XCU03PT1 Cordless LXT Chainsaw is a chainsaw that uses energy from a Lithium-Ion battery. As a result, it is a wireless machine that is secure and easy to use. In addition, the battery used is the 18V LXT of Lithium-Ion (36V) which could be guaranteed to keep you going for a while on a single charge.

Moreover, several other convenient features are also designed for this machine. First, thanks to the outer rotor system of direct drive brushless motors, this saw has the same high performance as many gas saws. Second, to further consolidate high performance, chain speed could possibly go up to 3/940 FPM.

Third, the chain adjuster which has a 3/8 inch sprocket could be self-adjusting without tools. Fourth, the convenient switch includes an LED light that is designed to automatically turn off when you have not turned off the machine. Thanks to that, the machine could be considered quite energy efficient.

If you have never used a chainsaw, you might consider this machine for The Best Chainsaw for Carving for its ease of use and convenience. Nevertheless, the price of the product would be quite high.

PROS

  • Eco-friendly product
  • The wood carving is quite smooth
  • Outer rotor system of direct drive brushless motor
  • The wood carving is quite smooth
  • Has chain adjuster
  • Safety for the user

CONS

  • High price
  • It could take long time to charge the battery

DEWALT 20V MAX XR Chainsaw, 12-Inch, Tool Only (DCCS620B)
  • Low kick back 12" Oregon bar and chain: for construction and outdoor cutting applications
  • High efficiency brushless motor: maximizes run time and motor life and chain gauge 0. 043, chain speed 25. 2 feet/second

Dewalt Max XR 20V 12-inch Chainsaw is a compact and lightweight chainsaw that could be very convenient. Weighing in at just 8.8 pounds, you could easily carry it anywhere indoors and outdoors.

In terms of the ability to handle wood carving, the machine is considered to be quite good. This is thanks to a quality brushless motor that could cost an increased efficiency in the machine and its longevity. With a chain speed of 25.2 feet / sec and a length of 0.043 of chain it could produce smooth engravings and cuts.

This machine could be also equipped with a few other convenient features. First it has a tightening knob to stretch the chain without using external tools. Second, the automatic lubrication system is also equipped.

Besides that, thanks to the 12-inch Oregon bar and chain, the machine could be running quite safely. We think it would be quite suitable for those who are not very experienced in using a saw.

PROS

  • Easy for beginner to use
  • Eco-friendly product
  • Compactable and portable
  • Has a chain speed of 25.2 feet / sec and a length of 0.043 of chain
  • Chain tension without tools
  • Lubrication system is automatic

CONS

  • It could take long time to charge the battery

Sale
Oregon CS1500 18 in. 15 Amp Self-Sharpening Corded Electric Chainsaw
  • Includes 18” guide bar and PowerSharp chain, which minimizes downtime by allowing you to sharpen your chain right on the saw in 3 seconds or less.
  • Get to work right away with the instant start capability

Oregon 15 Amp CS1500 Corded Electric Self Sharpening Chainsaw is an electric saw machine. The current used for this saw is 15 Amp which could give the machine enough strength for smooth carving.

The electric saw has a few outstanding features. First, thanks to the guide bar with 18 '' length and the PowerSharp of chain, the machine's performance would be better achieved. Second, the operating time of the machine is also more economical when the instant start button is installed. The engine is still running quite quietly, might not cause a lot of vibration and noise during use. 

In addition, the advanced automatic lubrication system named Lubri-Tech could help reduce chain friction and thereby increase the power of the saw. Finally, the chain brake is designed for the safety of the user.

Because it is powered by electricity, the power control of this saw is also considered simpler. However, you should be careful because maintaining this electric saw might be more complicated than in other models.

PROS

  • Lubrication system (Lubri-Tech) is automatic
  • Powerful performance and engine
  • Good anti-vibration
  • Affordable price
  • Quick start
  • Easy to use for newbies
  • Chain brake system safe for users

CONS

  • Maintenance is not easy

Sale
Worx WG303.1, 14.5 Amp 16-inch Corded Electric Chainsaw with Auto-Tension, Chain Brake
  • [AUTO-TENSION] Patented system prevents over-tightening and increases the life of the motor, bar, and chain
  • [AUTO-LUBRICATION] Keeps the chain running smooth and fast around the bar at 32 ft/s. And the oil-level indicator lets you know when you need to refill

Worx 14.5 Amp WF303.1 Electric Chainsaw could be a potential electric saw for carving. The machine has a 14.5A motor, so its performance could be highly appreciated.

This is a machine that would be quite easy to use for newbies thanks to its intelligent braking system. This type of brake would stop the machine immediately when it senses a sudden contact that could lead to sudden kickbacks. In addition, an automatic lubrication system is also set up and could offer a smooth chain speed of 32 ft / s.

Moreover, the handheld system of this machine might also be quite outstanding. The handle is covered with a rubber outside for a firm grip and better control. Besides that, as it also has handles in the front, cutting and carving the wood could be comfortable both vertically and horizontally.

Metal bumper materials could give you a strong support to handle all the toughest woods. In addition, it has been also patented against over-tightening and prolongs product life.

PROS

  • Light and compact
  • Powerful performance and engine
  • Automatic lubrication system
  • The product has been patented
  • The handle is convenient and comfortable
  • Chain brake system safe for users
  • Easy to use for newbies

CONS

  • The type of oil used for the machine is quite selective
  • Maintenance is not easy

Greenworks G-MAX 40V 16-Inch Cordless Chainsaw, 4AH Battery and a Charger Included 20312
  • Our Greenworks Brushless motor provides your Greenworks tool with longer run-time, more torque and more power. This leads to less wear and tear, extending the life-time of the tool
  • Compatible with Greenworks G-MAX 40V Li-Ion system offering a range of tools to Choose from.Avoid using solvents when cleaning plastic part

GreenWorks 20312 G-Max Cordless Carving Chainsaw could be another product worth considering that uses battery power. In addition, as this is a cordless saw, it could be quite flexible to move, carry and saw wood anywhere.

Besides, this saw machine could also complete the craving task quite well. First, the cutting efficiency is increased by 30% thanks to the high torque system that is provided by a brushless motor. This also reduces vibration (up to 70%). Second, the series is designed to be compatible with Greenworks G-MAX 40V Li-Ion system, so there could be more choices for tools (up to 25 types) and accessories. Finally, the saw has an electronic chain brake, so it would be safe and kickback is avoided.

Since this machine is battery-operated, it could be considered as an eco-friendly product. However, you should note that the charging time of the device might be a bit long.

PROS

  • Eco-friendly product
  • Compactable and portable
  • High torque system thanks to a brushless motor
  • Good anti-vibration
  • Safety for the user
  • More choices for tools (up to 25 types) and accessories

CONS

  • There are a few plastic parts
  • It could take long time to charge the battery

Poulan Pro 20 in. 50cc 2-Cycle Gas Chainsaw, PR5020
  • With the OxyPower engine technology, you can get that extra power for virtually any task. This technology offers a more powerful engine, but also 70% less emissions and 20% lower fuel consumption
  • Effortless pull starting system reduces pull force 30% for easier starting and reduced wear on the starter mechanism

The Poulan Pro 50cc PR5020 20 Inch 2 - Cycle Gas Chainsaw could be a high powered saw for The Best Chainsaw for Carving. This machine uses Gas fuel through OxyPower engine technology. Thanks to this technology, the efficiency could be enhanced with 20% savings in fuel and 70% reduction in emissions.

In addition, with the System of Effortless Pull-Start (EPS), getting started becomes simpler and quicker without too much effort to pull. The handle would be also extremely convenient because the combi tool is integrated.

Furthermore, the screening machine of the saw machine is cleverly designed so that the Poulan Pro 50cc PR5020 20 Inch 2 - Cycle Gas Chainsaw could be started more easily and the product maintenance is also easier. Cleaning the filter and bolt could also be easy.

This machine would be also warranted for 2 years. However, this machine might be not eco-friendly and it could weigh quite a bit (17lbs).

PROS

  • Has System of Effortless Pull-Start (EPS)
  • Great of guarantee policy
  • High capacity motor
  • Quick start
  • Powerful performance and engine

CONS

  • Difficult to use
  • Heavy weight
  • Not environmentally friendly

Remington RM4618 Outlaw 46cc 2-Cycle 18-Inch Gas Powered Chainsaw with Carrying Case Automatic Chain Oiler and 5-Point Anti Vibration System, 46 cc-18, Orange
  • HIGH OUTPUT ENGINE WITH 18-INCH BAR AND CHAIN: 46cc full crank 2 cycle engine provides greater power and less vibration. Premium 18-Inch bar and low-kickback chain cuts through even the toughest wood quickly and easily.
  • QUICKSTART TECHNOLOGY: Designed for quicker, smoother and easier pull starts allowing you to get to work right away on yard work, lawn care, and other projects.

The next product we would like to mention in this top 13 list is the Remington 46CC 2 Cycle RM4618 Carving Chainsaw. This could be a compact saw machine that meets the requirements needed for wood carving.

First to mention is the ability to provide large transparency and reduce vibration thanks to 46CC motor and 2 cycles. Next, it could skillfully engrave wood because it possesses 18 inches of bar and chain. In addition, with the technology of quick-start, the product could help you to start and complete the project more efficiently.

Furthermore, the chassis of the product is designed to be sturdy and durable to withstand the heaviest and harshest cutting forces. However, the product could be still lightweight for you to easily hold. For added support, this saw comes with a padded handle on the handle to make it more comfortable to use.

Auto oil is also used on this product to keep the bars and chains smooth and produce the smoothest cuts. The downside of the product might be the use of gas, so it might take time for regular maintenance.

PROS

  • Using 46CC motor and 2 cycles
  • Has the technology of quick-start
  • Has padded handle
  • Good anti-vibration
  • Light and compact

CONS

  • Need to take time for regular maintenance.
  • Refueling is often required

Sale
CRAFTSMAN Chainsaw, 8-Amp, 14-Inch (CMECS614)
  • POWERFUL MOTOR: 8 Amp motor helps with those tough cuts
  • COMPACT DESIGN: 14-In. compact design for cutting in small spaces

Another electric saw we want to mention is the Craftsman CMECS614 Chainsaw. This electric saw uses 8 Amp of current for the smoothest cutting and carving possible.

Craftsman CMECS614 Chainsaw could be compact (only 7.1 lbs) so it could be easy to hold, move and cut in small spaces. In addition, with a length of 14 inches, the cuts will be guaranteed to be most effective. Moreover, the convenient automatic oil-adding system is also designed quite conveniently.

This model also comes with a 3-year limited warranty. Because it is powered by electricity, the power control of this saw is also considered simpler. However, you should be careful because maintaining this electric saw might be more complicated than in other models.

PROS

  • Great at guarantee policy
  • Lightness and compactness
  • Easy to use for newbies
  • Safe for user
  • Automatic lubrication system

CONS

  • The type of oil used for the machine is quite selective
  • Maintenance is not easy
  • The engine would be not very powerful

Sale
MaxLander Electric Chain Saw, 9Amp Corded Chainsaw, 15m/s with 14 Inch Chain and Bar, Light Weight Multi Angle Fast Cut Powerful High Efficiency
  • 【14"Chain and Bar Included】The chainsaw comes with good quality 14" chain and bar. You can start your job quickly after getting the saw.Max cutting length is 355mm.
  • 【Fast Cut and Light Weight】The corded chainsaw is with 9A all copper wire motor. Chain speed is 15m/s. Fast chain speed will satisfy your cut. Light weight is suitable for lady or old man working. Enjoy the cut.

The MaxLander Corded Electric Carving Chainsaw is set to 9 Amp current - guaranteed so you could cut and carve wood (up to 355mm) and still be safe. The cooper is also designed to safely spend on users.

In addition, a 14 '' chain and guide bar are included for the best possible finishing of the project. Chain speed up to 15m / s and combined with that weight, the performance of this machine might be quite good. Furthermore, it could also be quite convenient that the chain is automatically tensioned without the need for external tools.

An automatic oiling system has also been set up for this saw. Moreover, the room also observes oil is quite comfortable, so you could easily monitor and control the oil during the carving process. If you are new to this type of machine, we think it would be a carving chainsaw to consider.

PROS

  • Safe for user
  • Easily control the amount of oil used
  • Light and compact
  • Automatic lubrication system
  • Easy to use for newbies

CONS

  • The type of oil used for the machine is quite selective
  • Maintenance is not easy

Makita XCU02Z 18V X2 (36V) LXT Lithium-Ion Cordless 12" Chain Saw, Tool Only
  • Two 18V LXT Lithium-Ion batteries (not included) deliver the power and run time for corded demands without leaving the 18V LXT platform
  • Lower noise level at only 89 dB(A) and zero emissions for improved user comfort

The next Makita product that we want to review is the Lithium-Ion XCU02Z 18V X2 Chainsaw. The product uses lithium ion battery power and is wireless, so it could be quite convenient to carry and move. It is also rated as eco-friendly and quite safe and easy to use.

Moreover, with the combination of a lithium ion battery and 36 of volt power source, the product is also able to run for a long time without recharging. This would also be a pretty good carving machine. With a 1650 FPM line speed and 12 inches of guide bar, it can cut quickly and still smoothly. In addition, the chain system is set to self-adjust so it won't be too difficult to use. During use, the device is not too noisy and only emits less than 89 dB (A).

A rubber handle is also equipped for the most secure grip. In the end, the machine’s start-up system could be pretty quick, especially when compared to gas-powered machines.

PROS

  • Not too noisy
  • Eco-friendly product
  • The wood craving is quite smooth
  • Quick start
  • Has rubber handle
  • Safety for the user
  • Compactable and portable

CONS

  • Battery is not included
  • It could take long time to charge the battery

Complete Buying Guide: Which Is The Best Chainsaw for Carving

When you are involved in furniture work, it would be a mistake not to mention wood carving. Unlike conventional wood cutting, wood carving helps to create soft and lovely lines for your wood products. Therefore, it could be difficult for a conventional saw to step on the pedal. Instead, you need a The Best Chainsaw for Carving. With this machine, you could carve wood and create the finest finishes.

Best Chainsaw for Carving

So what is The Best Chainsaw for Carving? First, it also needs to have the basic functions of the basic chainsaw for cutting wood. It's powerful enough and the blade sharp enough to handle most woods. The types of wood commonly used in the interior should be mentioned as oak, guava, cotton, walnut or butternut. These woods are mostly soft, but still quite sturdy and solid, so it needs a powerful engine to produce the smoothest cut and engraved layers. Some other essential convenience features that should be included are automatic lubrication system, easy to clean or easy to maintain.

In addition, it also needs the functions necessary to be suitable for wood carving. Wood carving is the creation of details and patterns for the wood, so chainsaws need to be easy to hold and move. Therefore, the first factor to consider is the weight and size of the product. With a light weight (about 7 to 13 lbs) and compact size, the user could hold it with ease and complete the project effectively. To complement this function, saw machines could design handles for easy grip. The chainsaw machines could have 1 to 2 handles or an additional layer of rubber wrap around. 

Best Chainsaw for Carving

Thus, the grip while the engine is running will be more certain. Next, we need to consider the type of energy or fuel that the saw machine uses. The three common types of saws are gas saws, electric saws, and battery powered saws. Each of the above fuels has its own advantages and disadvantages. Users should consider and balance according to their needs and purposes to choose accordingly. The third factor to consider is the chainsaw power engine, bar and chain. This is also essential as it directly affects cuts and engravings. The motor for the sculpture does not need to be as strong as for the cutting of wood, but it should be sufficiently suitable and should be limited to vibration. The Best Chainsaw for Carving types need the best anti-vibration for the smoothest engraving possible. 

In addition, the engraved saw bar needs the necessary sharpness and length so that the implementation of the project is up to the standard. And the other last factor is safety during use. This is a machine that would be quite difficult to use and can cause injury so user protection structures are necessary. It can provide a safety brake for the machine or the ability to turn off the power automatically when it detects the possibility of a kickback. 

Best Chainsaw for Carving

In addition to the factors related to the functionality of The Best Chainsaw for Carving, the user should also pay attention to the price, warranty and their intended use. You could be an experienced or new user; Will you spend a lot of money on this machine or less? You need to balance your needs, wants, and abilities to find the right product.

And to easily choose The Best Chainsaw for Carving, we will recompose the following criteria:

Weight and dimensions

This saw needs to be compact in weight and size for easy handling and portability. The appropriate weight for this machine should be usually around 7 lbs to 13 lbs. Battery-powered and electric machines generally have a lower weight. Meanwhile, chainsaw gas machines usually have more energy weight.

Best Chainsaw for Carving

Handle

This is an essential element for The Best Chainsaw for Carving. The handles should be designed in a position that is easy to hold. Some machines even have 2 handles for best portability. In addition, the handles should be coated with rubber around for the best grip.

Fuel / Energy used

Common chainsaw machines are gas chainsaw, electric chainsaw and battery chainsaw. For gas chainsaws, the supply motor will be the most powerful and will likely be suitable for those with experience. Electric chainsaw and battery chainsaw would have less powerful motors but are quite easy to use and environmentally friendly. In particular, the chainsaw battery is also a wireless saw so it is quite convenient to move, although it might take a long time to charge the battery.

Chainsaw power engine and bar

The motor type for The Best Chainsaw for Carving needs to be both powerful enough to walk the saws of hardwoods while also requiring a certain amount of quietness. Machine vibration needs to be reduced in order to produce the finest engravings. Chainsaw bar needs the required sharpness and length.

Best Chainsaw for Carving

Price

The price of this machine could be quite flexible and usually ranges from 60 USD to 350 USD. The low-cost models are usually around $ 60 to $ 140, the average price is between $ 140 and $ 270 and the expensive would be around $ 270 or more. Most high priced chainsaw would be gas chainsaw

Safety

This could also be an important factor to consider. Using this machine could be quite difficult and the possibility of injury is not small. Therefore, chainsaws should be equipped with protection features. In particular, a safe brake or the ability to automatically turn off in the event of a kickback will be necessary. You should not forget to consider this factor.

Best Chainsaw for Carving

To help readers and beginners in particular get more interesting wood carving tips, we suggest you watch the following helpful video:

Conclusion: Our Top 5 Picks Of The Best Chainsaw for Carving

The Best Chainsaw for Carving would be needed if you love wood carving and furniture. It would help you create the most beautiful and sophisticated products.

The essential features that should be in this type of machine are compact size, good vibration reduction, with a handle and a powerful motor. There will be many choices for you when there are 3 popular types of machines: gas, electric and battery. Each type has its own advantages to suit each needs of each person. You could choose electric and battery for ease of use or choose gas if you have a lot of experience and so on.

To summarize, we recommend 5 The Best Chainsaw for Carving  presenting a variety of needs.

1

BEST FOR OVERALL

BLACK+DECKER 20V Max Cordless Chainsaw, 10-Inch, Tool Only (LCS1020B)
  • 10 inches Premium Oregon low kickback bar and chain
  • Tool-Free blade tension system for quick adjustments

2

BEST FOR ENVIRONMENTAL FRIENDLINESS

Makita XCU03PT1 18V X2 (36V) LXT Lithium-Ion Brushless Cordless 14" Chain Saw Kit with, 4 Batteries (5.0Ah)
  • Makita-built outer rotor BL Brushless motor direct-drive system provides high power efficiency equivalent to a 32cc gas chain saw
  • Variable speed trigger and high chain speed (0-3, 940 FPM) For improved cutting performance

3

BEST FOR FEATURE

Remington RM4618 Outlaw 46cc 2-Cycle 18-Inch Gas Powered Chainsaw with Carrying Case Automatic Chain Oiler and 5-Point Anti Vibration System, 46 cc-18, Orange
  • HIGH OUTPUT ENGINE WITH 18-INCH BAR AND CHAIN: 46cc full crank 2 cycle engine provides greater power and less vibration. Premium 18-Inch bar and low-kickback chain cuts through even the toughest wood quickly and easily.
  • QUICKSTART TECHNOLOGY: Designed for quicker, smoother and easier pull starts allowing you to get to work right away on yard work, lawn care, and other projects.

4

BEST FOR PRICE

Sale
CRAFTSMAN Chainsaw, 8-Amp, 14-Inch (CMECS614)
  • POWERFUL MOTOR: 8 Amp motor helps with those tough cuts
  • COMPACT DESIGN: 14-In. compact design for cutting in small spaces

5

BEST FOR BEGINNER

Sale
MaxLander Electric Chain Saw, 9Amp Corded Chainsaw, 15m/s with 14 Inch Chain and Bar, Light Weight Multi Angle Fast Cut Powerful High Efficiency
  • 【14"Chain and Bar Included】The chainsaw comes with good quality 14" chain and bar. You can start your job quickly after getting the saw.Max cutting length is 355mm.
  • 【Fast Cut and Light Weight】The corded chainsaw is with 9A all copper wire motor. Chain speed is 15m/s. Fast chain speed will satisfy your cut. Light weight is suitable for lady or old man working. Enjoy the cut.

Overall, we choose the Black + Decker Max Cordless 20V Chainsaw as the most comprehensive product in every way. However, you could also sample other products to suit your particular desires. Each product would have its own advantages to suit each need

Best Chainsaw for Carving

You should consider it carefully and do not forget to share your opinion with us.

Thanks for reading!

  • Don't forget to share your thoughts about best chainsaw for carving at the comment box below!

Leave a Comment